Tungsten CoG Weights Instructions

PINECAR

manufactured by WOODLAND SCENICS

• PO BOX 98, LINN CREEK, MO 65052 • I5 • pinecar.com

TUNGSTEN CoG WEIGHTS™

INSTRUCTIONS

•UseTungstenCoGWeightsindividuallyorasasingle-unit(Fig. 1).Single-Unit:Insertone

TungstenCoGWeightintotheother,aligningthegrooveandkey(Fig. 2).

•

Tungsten CoG Weights fit a 23/64”diametercavityand are adjustable with a3mm Allen

wrench(Fig. 3).NOTE:ThecavitymayneedtobedeeperthandesiredCoGlocation.

•Turnclockwisetomoveforwardandcounterclockwisetomovebackward.

PineCarCoGSystem™(P3918)includestwoTungstenCoGWeights,23/64”DrillBit(1/4”

shank),3mmAllenWrench,andFulcrumPointformeasuringcenterofgravity.Formore

informationoncenterofgravityandotherPineCarspeedtips,visitusatpinecar.com.

Fig. 3

Fig. 2

KeyandGroove

CléetRainure

INSTRUCTIONS

•UtilisezTungstenCoGWeightsindividuellementoucommeuneunitéseule(Fig. 1).Unité

Seule:InsérerunTungstenCoGWeightdansl’autre,enalignantlarainureetlaclé(Fig. 2).

•TungstenCoGWeightsformeunecavité9mmdediamètreetsontréglableavecunecléAllende3mm(Fig. 3).REMARQUE:Lacavité

peutdoiventêtreplusprofondquel’emplacementdésirédeCoG.

•Tourneràdroitepoursedéplacerversl’avantetverslagauchepourreculer.

PineCarCoGSystem™(P3918)comprenddeux TungstenCoGWeights,23/64” foret de perçage(tige1/4”),cléAllende3 mm, etle

pointd’appuipourmesurerlecentredegravité.Pourplusd’informationssurlecentredegravitéetd’autresconseilsdevitessePineCar,

visitez-nousàpinecar.com.

Fig. 1

PAGE 1
TUNGSTEN CoG WEIGHTS™ Fig. 2 INSTRUCTIONS Key and Groove Clé et Rainure • Use Tungsten CoG Weights individually or as a single-unit (Fig. 1). Single-Unit: Insert one Tungsten CoG Weight into the other, aligning the groove and key (Fig. 2). • Tungsten CoG Weights fit a 23/64” diameter cavity and are adjustable with a 3mm Allen wrench (Fig. 3). NOTE: The cavity may need to be deeper than desired CoG location. • Turn clockwise to move forward and counterclockwise to move backward. Fig. 1 Fig.