Instructions / Assembly

ManualsBrandsPinecroft ManualsBarn Doors42 in. x 84 in. Millbrooke Cherry 3-Lite Acrylic Pane Ready to Assemble PVC Vinyl Barn Door w/Sliding Door Hardware Kit

PART DESCRIPTION QTY

DOOR STILE

REINFORCEMENT

PLATES

TOP/BOTTOM

DOOR RAILS

1 Ea.

REINFORCEMENT CLIP 4

BOTTOM

TRANSOM RAIL

TRANSOM STILES 2

WINDOW GASKETS 12

WINDOW PANELS 3

REINFORCEMENT CLIP 2

U CLIP BRACKETS 2

DOOR PANELS 7

START/END DOOR PANELS

(included with 42” door only)

1 Ea.

SIDE FINISHING STRIPS 2

TOP/BOTTOM

FINISHING STRIPS

ROLLER BRACKETS 2

HANDLE

(includes handle, bolts, washers,

nuts, wrenches)

SCREWS

to attach U Clip Brackets

(includes

2 extra)

TRACK

(includes anchors for

masonry application)

TRACK EXTENSION KIT

(included with 42" door only)

extension

kit

SPACERS

for track install

DOOR STOPS

FLOOR GUIDE

with screws

SAFETY SPACERS

with screws

Lag Bolts

for Track Installation

ALLEN SCREWS

for Roller Brackets

SCREWS

to attach Rails

42” G Style Millbrooke Parts List

A B C1

N 0

P Q

S T

X Y Z

Summary of content (7 pages)

PAGE 1
42” G Style Millbrooke Parts List PART DESCRIPTION QTY A DOOR STILE 2 B REINFORCEMENT PLATES 2 C1 C2 TOP/BOTTOM DOOR RAILS 1 Ea. D REINFORCEMENT CLIP 4 E1 BOTTOM TRANSOM RAIL 1 E2 TRANSOM STILES 2 E4 WINDOW GASKETS 12 E6 WINDOW PANELS 3 F REINFORCEMENT CLIP 2 G U CLIP BRACKETS 2 H DOOR PANELS 7 J1 L1 START/END DOOR PANELS (included with 42” door only) 1 Ea.
PAGE 2
Overview G Style 42” T O R S G X R1 D Z O F E6 M T N W C1 Y Q E2 F E6 E2 E1 G D E6 E4 M F P A L1 H A H H H H H H J1 C2 B V B D N
PAGE 3
PVC Barn Door Assembly and Track Installation G Style 42” Please read ALL instructions before you begin installation. You MUST determine if you need a Mounting Board prior to doing ANY installation. Due to many overlapping factors such as the location of wall studs, the weight of a Barn door and the various types of trim used in homes, we recommend using a Mounting Board in all situations. Track must be installed into Solid Blocking or Head Casing.
PAGE 4
PVC Barn Door Assembly and Track Installation G Style 42” 4. Assemble Top Rail and Transom Section 5. Attach Door Stile Place side gasket onto window panel. See Figure 5B. Take the Top Rail (C1), making sure the side with the large holes is facing to the outside. Place 2 of the 4” screws (Z) through the outside channel of the Top rail until fully inserted. Place reinforcement clip (F) onto screw shafts. Take one of the vertical transom stiles (E2) and line up the extrusion holes with the screws.
PAGE 5
PVC Barn Door Assembly and Track Installation G Style 42” 6. Attach Bottom Door Rail to Stile 8. Place side gasket onto the window panel. Secure the remaining stile (A). Make sure the side with the large holes is facing outward. Insert one of the Reinforcement plates (B) into the bottom of the Stile into the innermost chamber of the Stile. See Figure 7. Fig. 2A Figure 7 Place 2 of the 4” screws (Z) into the 2 holes in the outside of the channel. Make sure they are fully inserted. See Figure 7A & 7B.
PAGE 6
PVC Barn Door Assembly and Track Installation G Style 42” 9. Install Roller Brackets Line up the holes on the Roller Bracket (O) with the U bracket (G) and secure with the 2 allen screws (Y). Repeat with the other Roller bracket (O). See Figure 10. 12. Place door onto Track Position the door over the opening and slightly tilt the bottom of the door outward away from the wall. Set the rollers securely onto the track.
PAGE 7
” PVC Barn Door Assembly and Track Installation G Style 42” 14. Install Floor Guide 2 The Bottom Door guide INCH the door from swinging 2 (V) keeps CH N I outward away from the wall. To locate the proper installation position in the floor, slide the door into the closed position and mark the outside edge of the door on the floor. Now place the door into the open position and mark the inside edge of the door on the floor. Make sure your guide location is well marked.