Installation Guide

LTL Home Products, Inc. • 125 Route 61 • Schuylkill Haven, PA 17972
800-360-1585
www.ltlhomeproducts.com
[e-mail]
LTL Home Products, Inc. - 125 Route 61 - Schuylkill Haven - PA – 17972
Congratulations on your high quality purchase! Pinecroft™ Shutters by LTL Home Products, Inc., are sure to add a
beautiful, distinctive touch to your home. The following guidelines are designed to help you finish and install
your new shutters with professional looking results.
As with any quality all-wood product, these exterior shutters should be properly finished .
1 - Prime the entire shutter (all exposed surfaces) with a high quality oil-base primer, applied according to paint
label instructions.
2 - Allow to dry as specified.
3 - After priming, if the wood seems ‘‘fuzzy’’ or ‘‘rough’’, sand with medium to fine sandpaper or steel wool.
4 - To give added protection against water infiltration, apply good quality caulk or spackling putty to the top
edge of the shutter.
5 - Apply finish coat/coats of a quality exterior paint.
1 - Apply exterior stain according to instructions on stain label.
2 - Sand if necessary (see #4 above).
3 - Apply adequate coats of exterior sealer.
- Medium Screwdriver
- Drill
- Safety Glasses
- Paint Brushes, Sanding Paper
- Primer/Paint or Stain/Sealer
- Non-corrosive screws
- Spacers (i.e. galvanized washers)
- Masonry anchor (optional)