Instruction Manual

REMOTE CONTROL (LN-R1) code pair instruction manual
Forward key Brake key
Position indicator
Reserved function keys Signal lamp
Backspace Left key Right click
Code key Governor key
1) first use, installed on the remote control battery, the gear indicator light is often bright,
and then open the child's total power supply, without the code, for the code state, can be
operated.
2) if we need to shut down the power of the baby car on the code, then press the M key
for 5 seconds, then the stall lamp flickers, then undo the M key, and then open the power
of the baby carriage. The position lamp is always bright, indicating that the code is
successful. At this time, the remote controller and the receiver are used for one to one.
3) if the code is needed again, turn off the total power of the baby car, press the M key for
more than 8 seconds, the stall lamp flickers, and then release the M key to open the total
power supply of the baby carriage. The position lamp is always bright, which indicates
that the pass state is successful.
4) if you press any key of the remote control and find the light is not bright, please replace
the battery in time. Please take out the battery when you don't need it for a long time.
5) the remote control needs adult operation to avoid accidents. The color of the picture is
only a reference, and the object is specific.