- Pinnacle Air Cleaner User Manual

Troubleshooting Guide
Problem Possible Cause Corrective Action
Fan does not operate
1. No power
Inspect Power Cord for damage. Be sure
unit is plugged in and turned on.
2. Bad switch
Replace Power Switch (Note: To prolong
life of Power Switch, it is recommended
that the fan is first operated in LOW for 5-
10 seconds before switching to HIGH).
3. Motor is humming
Capacitor is damaged or belt is too tight.
Replace Capacitor or loosen belt.
Reduced Air Flow
1. Loose pulleys or fan blade
Tighten motor pulley Hex Screw.
2. Loose or worn belt
See page 3 for belt tightening instructions.
3. Motor is humming
Capacitor is damaged or belt is too tight..
Replace Capacitor or loosen belt.
Excess Noise (vibration,
slapping, squealing)
1. Fan is not on level ground
Turn off fan, and relocate unit to smooth
level surface.
2. Loose pulley or belt
Tighten Hex screw to tighten Motor Pulley.
See page 3 for for belt tightening instruc-
tions.
3. Motor bolts are not secure
Tighten Motor Safeguard bolts and 4 motor
bolts.
4. Defective fan bearings
Replace Fan Bearings.
Pinnacle Products International, Inc. reserves the right to make any changes in materials, specifications, prices or
design without notice. Pinnacle Products International, Inc. may also discontinue items at any time.
Pinnacle Products International, Inc. Portable Air Circulator User’s Manual
Page 5
Specifications subject to change without notice
Capacitor Assembly
Fan Shaft Assembly
NEVER LEAVE A FAN
OPERATING UNATTENDED
Portable
Air Circulator