Operation Manual

Chapter 15: Making your movie 265
If you need hands-on control, click the Settings button
to open the correct panel of options for your chosen
media type. When you have confirmed your settings,
click the Create button to begin output.
Preparing your movie for output
Before your movie is completely ready for output some
preprocessing will usually be required. In general,
Studio will need to “render” (generate video frames in
the output format for) any transitions, titles, disc menus
and video effects you’ve added to your movie. Any
files generated by Studio during this process are stored
in the auxiliary files folder, whose location you can set
using the folder button at the top of the Output
Browser.

OUTPUT TO DISC MEDIA
Studio can output movies directly onto VCD
(VideoCD), S-VCD (Super VideoCD), DVD, HD DVD
and Blu-ray discs, if the requisite disc burning
hardware is available on your system.
Whether or not you have a disc burner, Studio can also
create a “disc image” – a set of files containing the
same information that would be stored onto the disc –
to a directory on your hard drive. The image can
subsequently be burned to disc.