User's Manual

En
22
Types of BEAT FX
LOW CUT ECHO
1
A delayed sound with the low frequency range reduced is output several
times and gradually attenuated according to the beat fraction set with
the [BEAT c, d] buttons.
! Lowering the channel faders and cutting the input volume leaves an
echo sound, producing a fade out.
Input sound turned off
Time
Fade-out
1 beat
BEAT c, d buttons
Sets the delay time between 1/16 and 16 beats with
respect to 1 beat of BPM time.
LEVEL/DEPTH control
Sets the balance between the original sound and the
echo sound.
ECHO
1
A delayed sound is output several times and gradually attenuated
according to the beat fraction set with the [BEAT c, d] buttons.
! Lowering the channel faders and cutting the input volume leaves an
echo sound, producing a fade out.
Input sound turned off
Time
Fade-out
1 beat
BEAT c, d buttons
Sets the delay time between 1/16 and 16 beats with
respect to 1 beat of BPM time.
LEVEL/DEPTH control
Sets the balance between the original sound and the
echo sound.
MULTI TAP DELAY
1
A delayed sound is output up to 7 times in 1/8 beat intervals according to
the beat fraction set with the [BEAT c, d] buttons.
! Lowering the channel faders and cutting the input volume leaves a
delayed sound.
MI
NMAX
MI
NMAX
LEVEL/DEPTH
MI
NMAX
1/8 beat
1/4 beat
1/1 beat
Tim
e
BEAT c, d buttons
Sets the effect time between 1/16 and 16 beats with
respect to 1 beat of BPM time.
LEVEL/DEPTH control
Sets the volume to an odd-number delay from the
[MIN] position to the center position, and an even-
number delay from the center position to the [MAX]
position.
SPIRAL
1
A reverberation effect is applied to the input sound.
The pitch changes simultaneously if the delay time is changed.
! Lowering the channel faders and cutting the input volume leaves an
effect sound.
Input sound turned off
Time
Fade-out
1 beat
BEAT c, d buttons
Sets the delay time between 1/16 and 16 beats with
respect to 1 beat of BPM time.
LEVEL/DEPTH control
Sets feedback, and the balance between the original
sound and the effect sound.
REVERB
1
A reverberation effect is applied to the input sound.
! Lowering the channel faders and cutting the input volume leaves a
delay sound.
Level
Direct sound
Early reflected sound
Reverberations
1%
100%
Time
BEAT c, d buttons
Sets the extent of the reverberation effect between 1
and 100
%.
LEVEL/DEPTH control
Sets the balance between the original sound and the
effect sound.
TRANS
The sound is cut according to the beat fraction set with the [BEAT c, d]
buttons.
Cut Cut
1/1 beat
Time
BEAT c, d buttons
Sets the beat fraction between 1/16 and 16 with
respect to 1 beat of BPM time.
LEVEL/DEPTH control
Sets the duty ratio and balance between the original
sound and effect sound.
ENIGMA JET
A flanger effect is produced according to the beat fraction set with the
[BEAT c, d] buttons. The pitch sounds as if it continues to ascend or
descend.
BEAT c, d buttons
Sets the beat fraction between 1/16 and 64 beats or
between -64 and -1/16 beats, with respect to 1 beat
of BPM time. The pitch ascends for beat fractions
between 1/16 and 64 beats. The pitch descends for
beat fractions between -64 and -1/16.
LEVEL/DEPTH control
The further the control is turned clockwise, the more
the effect is stressed.
When turned all the way counterclockwise, only the
original sound is output.