User's Manual

31
Part names and functions
31
Rear panel
1 2 3 4 5 7 769a ac fedg88 b
3
Top panel
1 DC cord hook
Hook for the AC adapter power cord.
!
If the AC adapter is disconnected during playback, the sound will be
interrupted.
2 DC IN terminal
Connect to a power outlet using the included AC adapter (with the included
power cord connected).
!
Connect the AC adapter after all the connections between devices are
completed.
!
Use the included AC adapter.
3 u switch
Turns this unit on or puts this unit into standby mode.
4 BOOTH output terminals
Output terminals for booth monitor.
!
Compatible with TRS connector type balanced outputs.
Be sure to use these as balanced outputs.
!
The master channel sound can be output from the [BOOTH] output
terminals regardless of the audio level set for the master channel.
The volume level can be adjusted with the [BOOTH LEVEL] control.
5 MASTER 2 output terminals
Connect a powered speaker, a power amp, etc.
!
Compatible with RCA pin-jack type unbalanced outputs.