User's Manual

48
Advanced operation
48
 Setting and calling out a 4 beat loop
1 Press the [HOT CUE] mode button.
This unit enters hot cue mode.
2 Press the [LOOP IN/4 BEAT] button for over 1 second during
playback.
Sets a 4 beat loop at the point where the button is pressed, and loop
playback starts.
3 During loop playback, press a performance pad to set a loop
during loop playback.
4 Press the performance pad to which the loop is set.
Loop playback starts from the point where the loop is set.
! Press a performance pad while pressing the [SHIFT] button to clear the loop.
 Setting and calling out a manual loop
1 Press the [HOT CUE] mode button.
This unit enters hot cue mode.
2 Press the [LOOP IN/4 BEAT] button during playback and then
press the [LOOP OUT] button.
Loop playback starts.
3 During loop playback, press a performance pad to set a loop
during loop playback.
4 Press the performance pad to which the loop is set.
Loop playback starts from the point where the loop is set.
! Press a performance pad while pressing the [SHIFT] button to clear the
loop.
Using the pad FX
Various performances are possible with the simple operation of
pressing and releasing performance pads.
1 Press the [PAD FX1] mode button.
This unit enters pad FX mode 1.
Effects are assigned to the performance pads as shown below.