User's Manual

97
Additional information
97
Problem Check Remedy
Sound is not
output, or
sound is too
small.
Are the connection
cables properly
connected?
Connect the connection cables
properly.
Are the terminals and
plugs dirty?
Clean the terminals and plugs
before connecting them to the
unit.
Is the driver software
properly set?
Set the driver software properly.
(p. 105 )
Sound is
distorted.
Is the
[MASTER LEVEL]
control set to the
correct position?
Adjust the [MASTER LEVEL]
control so that the orange
indicator on the master level
indicator lights at the peak level.
Is the [TRIM] control
set to the correct
position?
Adjust the [TRIM] control
so that the channel level
indicator’s orange indicator
lights at the peak level.
Is the [LINE/PHONO]
switch set to the proper
position?
Set the [LINE/PHONO] switch
to the proper position.
Sound is
interrupted
when the DJ
software is
used.
Is the buffer size
(latency) value
appropriate?
On a Windows operating
system, use the setting utility to
set an appropriate buffer size
value. (p. 91 )
On a Macintosh, set the
appropriate buffer size (latency)
value for the DJ software.
Cannot
output the
microphone
sound.
Is the [MIC ON, OFF]
selector switch set to
the correct position?
Set the [MIC ON, OFF] selector
switches to the correct position.