User's Manual

104
En
Changing the settings
Launching Utilities mode
Be sure to close your DJ application and then launch Utilities mode.
To use Utilities mode with connecting to rekordbox, set on the
preferences screen on rekordbox. Refer to page 68 to change the
settings on rekordbox.
(To use MIDI controller mode and Demo mode, set them on the unit.)
1 Disconnect the USB cable from your PC/Mac.
2 Hold both the [SHIFT] and [PLAY/PAUSE ] buttons on the left
deck and connect the USB cable to your PC/Mac.
Utilities mode launches.
3 Change the settings.
When you change the settings, they will be saved. While saving, the bottom
row of Performance Pads on the left deck flashes. If you disconnect the USB
cable while the pads are flashing, settings may not be saved.
4 Disconnect the USB cable to turn off the unit.
Utilities mode turns off.