User's Manual

Part names and functions
25
En
Rear panel
1 MASTER output terminals (RCA pin jack type)
Connection for a powered speaker, a power amplifier, etc.
• Compatible with RCA pin jack-type unbalanced outputs.
2 BOOTH output terminals (RCA pin jack type)
Connection for a powered speaker, a power amplifier, etc.
• Compatible with RCA pin jack-type unbalanced outputs.
3 MIC ATT. (Attenuator) knob
Adjusts the volume of input sound from the [MIC] input terminal.
• Depending on the microphone, the gain of microphone sound differs. Use
this knob to adjust the volume for your microphone before using it. While
DJing, use the [MIC LEVEL] knob on the front panel to adjust the
microphone volume.
4 MIC input terminal (1/4" TRS Jack)
Connection for a microphone.
• Only a phone plug (1/4") can be used.
5USB port
Connection for a PC/Mac.
• Be sure to use the supplied USB cable.
• A USB hub can’t be used with the unit.
• If your PC/Mac has only a USB Type-C port, you’ll need to use a USB Type-
C male to USB Type-A female cable.
6 Kensington security slot
Connection for a cable lock for security.
1 4 5 632