User Manual

Monitoring sound with headphones

1 Connect headphones to the [PHONES] terminal.

2 Press the [CUE] button of the channel to be

monitored.

3 Rotate the [HEADPHONES MIXING] control.

Adjust the balance of the volume between the channel selected with the

[CUE] button and MASTER.

4 Rotate the [HEADPHONES LEVEL] control.

Adjust the volume of the headphones.

Setting monitor output

The [MONO SPLIT, STEREO] setting can be changed with UTILITY.

! [MONO SPLIT]: Outputs the sound of the channel selected with the

[CUE] button to [L] and the sound of MASTER to R.

! [STEREO]: Outputs the sound selected with the [CUE] button in

stereo.

For details on the functions, see the Operating Instructions for this

product.

Turning off the system

1 Press the [USB STOP] button for over 2 seconds.

Do not disconnect the USB device or turn off this unit while the USB

indicator is lit or flashing. Doing so could delete the managementdata of

this unit and damage the USB device, resulting in unreadable data.

2 Disconnect the USB device.

3 Close the USB slot cover.

4 Press the [u] switch.

This unit turns off.