User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
100
En
– [HI]: –12 dB to +12 dB (10 kHz)
– [MID]: –12 dB to +12 dB (2.5 kHz)
– [LOW]: –12 dB to +12 dB (100 Hz)
Outputting sound from the [BOOTH] output terminals
Turn the [BOOTH LEVEL] knob.
Adjusts the level of sound output from the [BOOTH] output terminal.
Using BEAT FX
You can instantly set various effects that match the tempo (BPM =
Beats Per Minute) of the currently playing track.
1 Rotate the [BEAT FX] selector switch.
Selects a type of effect.
2 Rotate the BEAT FX channel selector switch.
Selects a channel to apply the effect to.
•[1] to [4], [AUX]: Applies the effect to the sound of the respective channels.
• [MIC1], [MIC2], [MIC1+2]: Applies the effect to the sound of the [MIC1] or
[MIC2] channel only or applies the effect to the sound of the [MIC1] and
[MIC2] channels.
• [CROSSFADER A], [CROSSFADER B]: Applies the effect to the sound of
the [A] (left) or [B] (right) side of the crossfader.
• [MASTER]: Applies the effect to the sound of the [MASTER] channel.
3 Press the [BEAT ] button or [BEAT ] button.
Increases or decreases the effect timing.
The effect time corresponding to the selected length is set automatically.
4 Press the [HI], [MID] or [LOW] button of [FX FREQUENCY].
You can select [HI], [MID] or [LOW] to apply effects.
5 Press the [BEAT FX ON/OFF] button.