User's Manual

Table Of Contents

Part names and functions

103

PING PONG

The delay sound with different delay times on the left and right outputs

with attenuating according to the beat you set with the [BEAT , ]

buttons. You will get an effect with a sense of stereo.

• When you move the channel fader to the bottom to cut the input

volume, echo sound remains (echo tail) and the sound is faded out.

• After the effect is turned off, the echo sound remains.

Buttons & knobs

[BEAT , ] buttons (parameter: 1/16 to 16 beats)

[TIME] knob (parameter: 1 msec to 4 000 msec)

[LEVEL/DEPTH] knob (parameter: Sets the balance between the

original sound and the echo sound.)

[X-PAD] (parameter: Sets the delay time.)

When you select an effect channel from [1] to [4] of the BEAT FX

channel selector switch, the effect sound can’t be monitored even if

you press the [CUE] button of the selected channel.

SPIRAL

A reverberation effect is applied to the input sound.

The pitch changes at the same time if the delay time is changed.

• When you move the channel fader to the bottom to cut the input

volume, the effect sound remains.

• After the effect is turned off, the effect sound remains.