User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
104
En
REVERB
A reverberation effect is applied to the input sound.
• When you move the channel fader to the bottom to cut the input
volume, the reverberation sound remains.
• After the effect is turned off, the reverberation sound remains.
Buttons & knobs
[BEAT , ] buttons (parameter: 1% to 100%)
[TIME] knob (parameter: 1% to 100%)
[LEVEL/DEPTH] knob (parameter: Sets the balance between the
original sound and the effect sound.)
[X-PAD] (parameter: Sets the cut off frequency of the filter.)
When you select an effect channel from [1] to [4] of the BEAT FX
channel selector switch, the effect sound can’t be monitored even if
you press the [CUE] button of the selected channel.
TRANS
The sound is cut according to the beat you set with the [BEAT , ]
buttons.
Buttons & knobs
[BEAT , ] buttons (parameter: 1/16 to 16 beats)
[TIME] knob (parameter: 10 msec to 16 000 msec)
[LEVEL/DEPTH] knob (parameter: Sets the balance between the
original sound and the effect sound.)
[X-PAD] (parameter: Sets the cut time.)