User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
108
En
Using SOUND COLOR FX
These effects change in association with the [COLOR] knobs for each
channel.
1 Press one of [SOUND COLOR FX] buttons.
Select an effect type.
The pressed button flashes.
• The same effect is set for [CH1] to [CH4].
• If you already selected one button and then pressed another, the newly
pressed button is selected.
• When you press the flashing button, the effect is turned off.
2 Turn a [COLOR] knob.
The effect is applied to the channel for which the knob is turned.
The effect’s quantitative parameter can be adjusted by turning the
[PARAMETER] knob.
Types of SOUND COLOR FX
SPACE
Adds reverb to the original sound.
[COLOR] knob:
Turn counterclockwise: Applies reverb to the low-range.
Turn clockwise: Applies reverb to the high-range.
[PARAMETER] knob:
Turn clockwise to increase the feedback.