User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
109
En
DUB ECHO
Outputs delayed sounds repeatedly and gradually attenuate it, giving
an echo effect.
[COLOR] knob:
Turn counterclockwise: Applies the echo effect to the mid-range only.
Turn clockwise: Applies the echo effect to the high-range only.
[PARAMETER] knob:
Turn clockwise to increase the feedback.
SWEEP
Turning the knob to the left produces a gate effect, and turning it to the
right produces a band pass filter effect.
[COLOR] knob:
Turn counterclockwise: Produces a gate effect making the sound
tighter, with a reduced sense of volume.
Turn clockwise: Steadily decreases the band pass filter bandwidth.
[PARAMETER] knob:
Turning the [COLOR] knob counterclockwise adjusts the gate effect.
Turn to the right to tighten the sound.
Turning the [COLOR] knob clockwise adjusts the center frequency.
Turn to the right to increase the center frequency.
NOISE
White noise generated inside the unit is mixed in to the sound of the
channel via the filter and output.
[COLOR] knob:
Turn counterclockwise: Gradually decreases the cut-off frequency of
the filter through which the white noise passes.
Turn clockwise: Gradually increases the cut-off frequency of the filter
through which the white noise passes.
[PARAMETER] knob:
Turn clockwise to increase the white noise volume.
The sound quality can be adjusted by turning the [EQ/ISO (HI, MID,
LOW)] knobs.