User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Before you start
11
En
• Operation isn’t guaranteed on all PC/Mac models, even if the system
requirements are met.
• Depending on power-saving settings and other conditions of the PC/
Mac, the CPU and hard disk may not provide sufficient processing
capabilities. For laptops in particular, make sure the PC/Mac is in the
best condition to provide constant high-level performance when
using rekordbox (e.g. by keeping the AC power connected).
• To use the internet, you need a separate contract with an internet
service provider, which you may have to pay for.
Installing the rekordbox software
For details on installing the rekordbox, refer to the “rekordbox
Introduction.”
rekordbox.com/manual
rekordbox (iOS/Android)
You can play tracks managed on rekordbox on this unit by connecting
a mobile device running rekordbox (iOS/Android) with this unit using a
USB cable. For supported devices, see rekordbox.com.
• For details on installing rekordbox (iOS/Android), see
rekordbox.com.
Using the online support website
Before making inquiries on rekordbox operating procedures or
technical issues, read the rekordbox (Mac/Windows) user’s manual
and online manual and refer to the FAQ on the rekordbox online
support page.
rekordbox.com