User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Operation
120
En
Auto play mode
• When Auto play mode is turned on, the Auto play mode icon in the
normal playback screen lights up and [A. CUE] turns off, and the
tracks in the category or folder containing the currently loaded track
are played consecutively until the end of the last track.
• The tracks are played in the order that they were loaded.
Auto standby setting
When this setting is enabled, the unit enters Standby mode
automatically after 4 hours if the following conditions are met.
– None of the unit’s buttons or knobs are operated.
– No audio signal is input.
– No PRO DJ LINK connections are made.
– No USB device is connected to the USB device insertion slot (Type
A terminal) on the unit’s top panel.
– No PC/Mac is connected to the [
USB] port (Type B terminal) on
the unit’s rear panel.
• When you press the [MASTER REC (WAKE UP)] button, Standby
mode is canceled.
• This unit is shipped with the Auto Standby function turned on. If you
don’t want to use the Auto Standby function, set [AUTO STANDBY]
to [OFF].