User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Operation
124
En
• ON AIR DISPLAY
Sets whether to display/hide the [ON AIR DISPLAY].
Setting ranges: ON*/OFF
• JOG DISPLAY MODE
Jog display section (page 36)
Setting ranges: AUTO*/INFO/SIMPLE/ARTWORK
• JOG RING BRIGHTNESS
Sets the brightness of the Jog ring illumination.
Setting ranges: OFF/1/2*
• JOG RING INDICATOR
Sets the Jog ring illumination to flash or not when the track’s
remaining time is running out.
Setting ranges: ON*/OFF
• VINYL SPEED ADJUST
Adjusting acceleration and deceleration level (page 45)
Setting ranges: TOUCH&RELEASE*/TOUCH/RELEASE
• AUTO PLAY MODE
Auto play mode (page 120)
Setting ranges: ON/OFF*
MIXER category
• EQUALIZER CURVE
Adjusting the sound quality (page 97)
Setting ranges: EQUALIZER*/ISOLATOR
• CHANNEL FADER CURVE
Sets the channel fader curve.
Mixer/effect section (page 92)
Setting ranges: [ ]CURVE1/[ ]CURVE2*/[ ]CURVE3
• CROSSFADER CURVE
Sets the crossfader curve.
Mixer/effect section (page 92)
Setting ranges: [ ]CURVE1/[ ]CURVE2*/[ ]CURVE3
• MASTER EQUALIZER