User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Operation
126
En
Setting ranges: PHONO*/LINE
• CH4 CONTROL TONE
Sets which device connected to the input terminal of PHONO/LINE
to send the time code signal for CH4.
Setting ranges: PHONO*/LINE
• MIXER MIDI MESSAGE
Turns MIDI on the mixer/effect section on/off.
Setting ranges: OFF/SEND*/SEND WITH TIME PARAM
GENERAL category
• LANGUAGE
Sets the language of the main display.
• PAD/BUTTON BRIGHTNESS
Sets the pad’s and button’s brightness.
Setting ranges: 1/2/3*/4
• LCD BRIGHTNESS
Sets the brightness of the main display.
Setting ranges: 1/2/3*/4/5
• JOG LCD BRIGHTNESS
Sets the brightness of the jog display.
Setting ranges: 1/2/3*/4/5
• SCREEN SAVER
When set to [ON], the screen saver starts up in any of the following
cases:
– When no track is loaded in this unit for over 5 minutes
– When no operation is performed for over 100 minutes while in the
pause or cue standby mode or when [END] is displayed on the
deck display section.
Setting ranges: ON*/OFF
• TOUCH DISPLAY CALIBRATION
Correcting deviation in the touch display calibration (page 122)
• AUTO STANDBY
Auto standby setting (page 120)