User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
128
En
Using DJ software
For the latest information on the unit’s supported DJ software, see the
Pioneer DJ support page below.
pioneerdj.com/support/
Operating DJ software
The unit also outputs operating data for the buttons and knobs in MIDI
format. If you connect a PC/Mac with a built-in MIDI compatible DJ
application via the USB cable, you can control the DJ application with
the unit. You can also output a music file playing on your PC/Mac from
the unit. To use this unit as an audio device, install the driver software
on your PC/Mac beforehand. This unit must also be selected in the DJ
software’s audio output device settings. For details, see your DJ
application’s user guide.
1 Connect the [ USB] port of the unit to your PC/Mac.
Connecting input/output terminals (page 23)
2 Press the [BROWSE (SEARCH)] button, and then press the
[LINK] button.
The connection screen is displayed.
If a media is connected to a DJ player with the PRO DJ LINK connection,
[ CONTROL MODE] is displayed on the media selecting screen.