User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Using DJ software
129
En
3 Press the [LOAD 1] or [LOAD 2] button.
The deck switches to Control mode.
4 Launch the DJ software.
Communication with the DJ software starts.
• The DJ software on your PC/Mac can be controlled using the buttons and
rotary selector on this unit.
• Some buttons may not control the DJ software.
• When there is a connection with the supported DJ software, the tracks and
folders are displayed in a list on the [BROWSE (SEARCH)] screen.
• Control mode is canceled when a track is loaded in the unit.
5 Change the control deck.
By one of following procedures, you can switch the control decks between 1
and 3 / 2 and 4. (toggle feature)
• Touch [DECK SELECT] in SHORTCUT.
• Press the [SHIFT] button twice.
About MIDI messages
For details on this unit’s MIDI messages, see: “List of MIDI Messages”.
• You can find the List of MIDI Messages from [XDJ-XZ] of the Pioneer
DJ website:
pioneerdj.com/support/