User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Additional information
131
En
Error messages
When the unit can’t work normally, an error code appears on the main
display. Check below and take the measures indicated. If an error code
not shown below is displayed, or the same error code is displayed
again after taking the indicated action, ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
• E-8302 (Error type: CANNOT PLAY TRACK)
Description of error:
Track data (files) on the storage device can’t be read correctly.
Cause and action:
The track data (file) may be corrupted.
Check if the track can be played with another player that supports
the same formats as the unit.
• E-8304, E-8305 (Error type: UNSUPPORTED FILE FORMAT)
Description of error:
Music files that can’t be played with the unit are loaded.
Cause and action:
The format isn’t supported by the unit.
Load music files in the supported formats.
Cleaning the touch display
Don’t use organic solvents, acids or alkalis to clean the surface of the
touch display. Wipe with a soft dry cloth or a cloth immersed in neutral
detergent that is squeezed properly.