User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Before you start
16
En
Installation procedure (Mac)
Do not connect the unit to your Mac until installation is complete.
1 Unzip the downloaded driver software (XDJXZM###dmg.zip).
“###” indicates the driver software’s version.
2 Double-click [XDJ-XZ_M_#.#.#.dmg].
“#.#.#” indicates the driver software’s version.
3 Double-click [XDJ-XZAudioDriver.pkg].
4 Read the information displayed on the screen and click [Continue]
to proceed.
5 When the end user license agreement appears, select the
language for the installation, read [Software end user license
agreement] carefully, and then click [Continue].
6Click [Agree] box if you agree to the contents of the [Software end
user license agreement].
If you don’t agree to the contents of the [Software end user license
agreement], click [Disagree] and stop installation.
7 Follow the on-screen instructions to install.