User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
31
En
Recording the performance
You can record the sound from the [MASTER] output as a WAV file on
a USB device.
• The name of the files created when the sound is recorded is in the
format [REC***.WAV] (*** is a 3-digit number).
1 Connect the USB device to the USB2 slot.
2 Press the [MASTER REC (WAKE UP)] button.
Recording starts.
The [MASTER REC (WAKE UP)] button flashes.
• When the [MASTER REC (WAKE UP)] button is pressed again, the lighting
of the [MASTER REC (WAKE UP)] button turns off and recording stops.
• Approximately 90 minutes recording is possible with 1 GB USB device.
Splitting a track while recording
Press the [TRACK MARK] button while recording.
Recording track is split and stored on the USB device.
The file is divided right at the point where the [TRACK MARK] button
is pressed. From this point onwards, the sound can continue to be
recorded as a new file.