User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
38
En
Shows the set Cue points, Loop points and Hot Cue points as marks.
7 Deck status
Displays SLIP and VINYL on/off.
8 SYNC
Lights up when [BEAT SYNC] is on.
9 Operation status
Shows the current playback position.
Rotates during playback, and stops when paused.
10 VINYL
Lights up when [VINYL] mode is set.
11 Playing speed adjustment range
Displays the range at which the playing speed can be adjusted.
12 Playing speed
Displays the playing speed. The value changes according to the position of the
[TEMPO] slider.
13 BPM
Displays the current BPM (= Beats Per Minute).
14 Waveform
Displays the waveform.
15 Time (minutes, seconds) / Loop beats
Indicates the remaining time and elapsed time switched by pressing the [TIME
MODE (AUTO CUE)] button.
Shows the loop beats during the loop playback.
16 Cue / Loop / Hot Cue point
Shows the position of the set Cue point, Loop point or Hot Cue point.
17 MASTER
Lights up when the deck is set as MASTER.