User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
40
En
Playback
Press the [ (PLAY/PAUSE)] button.
If [AUTO PLAY MODE] of the [UTILITY] screen is set to [OFF], the
track is played to the end, and then playback stops. The next track isn’t
played.
Pause
During playback, press the [ (PLAY/PAUSE)] button.
• Playback resumes when the [ (PLAY/PAUSE)] button is
pressed again.
Forward and reverse scanning (Search)
Press one of the [SEARCH , ] buttons.
The track is scanned in the forward or reverse direction while holding
one of the [SEARCH , ] buttons.
• If [AUTO PLAY MODE] of the [UTILITY] screen is set to [OFF], you
can’t rewind to the previous track or skip ahead to the next track.
• It isn’t possible to move to a different category or folder with this
function.
Finding the beginning of a track (Track Search)
Press one of the [TRACK SEARCH , ] buttons.
Press the [] to jump to the beginning of the next track.
When [] is pressed, the playback position returns to the beginning
of the currently playing track. When pressed twice quickly, the
playback position returns to the beginning of the previous track.
• It isn’t possible to jump to a different category or folder with this
function.