User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
42
En
Selecting the playing speed adjustment range
Press the [TEMPO] button.
The playing speed adjustment range switches each time the button is
pressed.
[±6, ±10, ±16, WIDE] is displayed on the main unit display.
• The speed can be adjusted in increments of 0.02% in the [±6]%
setting, 0.05% in the [±10] and [±16]% settings, and 0.5% in the
[WIDE] setting.
• The [WIDE] adjustment range is ±100%. When set to –100%,
playback stops.
Adjusting the playing speed without changing the pitch
(Master Tempo)
Press the [MASTER TEMPO] button.
The [MASTER TEMPO] button lights up. The pitch doesn’t change
even when the playing speed is changed with the [TEMPO] slider.
• The sound is digitally processed, so the sound quality changes.
• The unit keeps the Master Tempo setting even after it is turned off.
Playing in reverse
When the Quantize function is turned on, you might notice a slight
delay due to quantization.
Press the [DIRECTION, REV] button.
The [DIRECTION, REV] button lights up and reverse playback starts.
• You can’t rewind to the previous track with this function.
• When you turn the jog wheel, the direction of acceleration or
deceleration also reverses.
• When operations such as track search and loop playback are
performed during reverse playback, scratch play may not be
available.