User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
45
En
Adjusting acceleration and deceleration level
This function is only valid in [VINYL] mode.
Adjusts the deceleration level when the top of the jog wheel is pressed,
and the acceleration level when the jog wheel is released.
Turn the [VINYL SPEED ADJUST] knob.
The speed decreases when turned clockwise, and increases when
turned counterclockwise.
• In [VINYL] mode, press the [ (PLAY/PAUSE)] button to change
the acceleration and deceleration level at the same time.
• The following methods of adjustment can be set from the [UTILITY]
screen.
– TOUCH&RELEASE: Simultaneously adjusts the acceleration and
deceleration level.
– TOUCH: Adjusts only the deceleration level.
– RELEASE: Adjusts only the acceleration level.
Setting the Cue point
1 During playback, press the [ (PLAY/PAUSE)] button.
Playback is paused.
2 Press the [CUE] button.
The position is set as the cue point.
The [ (PLAY/PAUSE)] button flashes and the [CUE] button lights up.
No sound is output at this time.
• When a new cue point is set, the previously set cue point is canceled.
Adjusting the cue point position
1 Press the [SEARCH , ] button while the track is paused at
the cue point.
The [ (PLAY/PAUSE)] and [CUE] buttons flash.