User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
46
En
The cue point can be fine-tuned in units of 0.5 frames.
2 Press the [CUE] button.
A new cue point is set.
• When a new cue point is set, the previously set cue point is canceled.
Returning to the cue point (Back Cue)
During playback, press the [CUE] button.
Immediately returns to the currently set cue point and the track is
paused.
• When the
[ (PLAY/PAUSE)] button is pressed, playback starts from
the cue point.
Checking the cue point (Cue Sampler)
Press and hold down the [CUE] button after the playback position
returns to the cue point.
Playback starts from the set cue point. Playback continues while
holding the button.
• If the
[ (PLAY/PAUSE)] button is pressed during Cue Sampler,
playback continues even if the [CUE] button is released.
Setting the cue point during playback (Real Time Cue)
During playback, press the [LOOP IN/CUE (IN ADJUST)] button at the
position at which you want to set the cue point.