User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
48
En
Fine-tuning the Loop Out point (Loop Out Adjust)
1 During loop playback, press the [LOOP OUT (OUT ADJUST)]
button.
The [LOOP OUT (OUT ADJUST)] button starts flashing rapidly, and the
[LOOP IN/CUE (IN ADJUST)] button turns off.
The time of the Loop Out point is displayed on the main unit display.
2 Press the [SEARCH , ] button.
The Loop Out point can be adjusted in units of 0.5 frames.
• The same operation is possible using the jog wheel.
• The Loop Out point can’t be set before the Loop Out point.
3 Press the [LOOP OUT (OUT ADJUST)] button.
Loop playback resumes.
• Normal loop playback also resumes if no operation is performed for over 10
seconds.
Canceling loop playback (Loop Exit)
During loop playback, press the [RELOOP/EXIT] button.
Playback continues beyond the Loop Out point without returning to the
Loop In point.
Returning to loop playback (Reloop)
After canceling loop playback, press the [RELOOP/EXIT] button
during playback.
The playback position returns to the previously set Loop In point, and
loop playback resumes.