User's Manual

Part names and functions
50
En
 Using Re-trigger Loop
During loop playback, press the [LOOP IN/CUE (IN ADJUST)] button
while holding the [SHIFT] button.
Each time you press the button, the playback position returns to the
Loop In point and loop playback starts.
 Using an active loop
1 Connect the USB device to this unit.
2 Load a track you set an active loop on rekordbox.
You can set a loop stored in rekordbox as an active loop.
The set active loop point is displayed in the waveform, as indicated by 1
shown below.
When the playback position reaches to the setting point, the loop is set
automatically and loop playback begins.
 Emergency Loop
When a track can't be played any longer, a 4-beat loop is set
automatically to keep the sound going.
• The operation is restricted during emergency loop. To cancel
emergency loop, load the next track.
1