User's Manual

Part names and functions
51
En
Storing cue or loop points
1 Connect the USB device to this unit.
2 Set Cue Point or Loop Point.
3 Press the [MEMORY] button.
[ MEMORY] is displayed on the main unit display for several seconds, then
the point information is stored on the USB device.
Stored cue and loop points are indicated by a [] at the top of the waveform
display.
• To store loop points, press the [MEMORY] button during loop playback.
 Calling up stored cue or loop points
1 Connect the USB device to this unit.
2 Load the track containing the cue or loop points you want to call up.
Stored cue and loop points are indicated by a [] at the top of the waveform
display.
3 Press the [CUE/LOOP CALL  (LOOP 1/2X)] or [CUE/LOOP
CALL  (LOOP 2X)] button.
Press the [CUE/LOOP CALL  (LOOP 1/2X)] button to call up a point before
the currently playing position, and press the [CUE/LOOP CALL  (LOOP 2X)]
button to call up a point after the currently playing position.
The track jumps to the called up point and pauses.
• When multiple points are stored, a different point is called up each time the
button is pressed.
• Loops set as active loops can also be called up as stored loops.
• If the called up point has a comment set by rekordbox, the comment is
displayed in the track title display area.
• The comment list can also be displayed on the track list in the browse screen
by pressing the rotary selector. Select one from the displayed list and press
the [LOAD 1] or [LOAD 2] button to call up the selected point.