User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
52
En
4 Press the [ (PLAY/PAUSE)] button.
Normal or loop playback starts from the point that was called up.
Deleting stored cue or loop points
1 Connect the USB device to this unit.
2 Load the track containing the cue points or loop points you want to
delete.
Stored cue and loop points are indicated by [] at the top of the waveform
display.
3 Press the [CUE/LOOP CALL (LOOP 1/2X)] or [CUE/LOOP
CALL (LOOP 2X)] button to call up the point to be deleted.
The track jumps to the called up point and pauses.
• When multiple points are stored, a different point is called up each time the
button is pressed.
4 Press the [DELETE] button.
The main unit display shows [ DELETED], and the selected point
information is deleted.
• When a stored loop set as an active loop is deleted, the active loop is also
deleted.
Using Hot Cues
You can start playback instantly from the position where a Hot Cue is
set.
Up to 8 Hot Cue points can be set and saved for each track.