User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
56
En
Using Beat Loop
A loop with the specified number of beats is set based on the tempo of
the track and loop playback starts.
1 Press the [BEAT LOOP] button to switch to Beat Loop mode.
2 Press the Performance Pad corresponding to the number of beats
you want to set.
From the playback position where the Performance Pad was pressed, the loop
playback starts with the specified number of beats. During loop playback, the
Performance Pad will flash.
• You can specify 1/4 beat, 1/2 beat, 1 beat, 2 beats, 4 beats, 8 beats, 16 beats
and 32 beats.
• If the track’s BPM can’t be detected, the BPM is set to 120.
Canceling loop playback
To cancel a loop, either press the Performance Pad flashing during
loop playback, or press the [RELOOP/EXIT] button.
Using Beat Jump
The playback position can be moved according to the length of the
selected beat (1 beat, 2 beats, 4 beats or 8 beats).
• If a loop is set, it operates as a loop move.
1 Press the [BEAT JUMP] button to switch to Beat Jump mode.
2 Select the length of the beat and press a Performance Pad.
The playback position is moved according to the length of the selected beat.
• If the track’s BPM can’t be detected, the BPM is set to 120.
• When the Quantize function is turned on, you might notice a slight delay due
to quantization.