User's Manual
Table Of Contents
- How to read this manual
- Before you start
- Connections
- Part names and functions
- Operation
- Turning the power on
- Turning the power off
- Connecting and disconnecting USB devices
- Playing tracks
- Outputting sound
- Using the Quantize function
- Calling up settings stored on a USB device connected to the unit
- Changing the color set in the USB device connected to the unit
- Changing the settings
- Auto play mode
- Auto standby setting
- Talkover function
- Language settings
- Correcting deviation in the touch display calibration
- Setting preferences
- Using DJ software
- Additional information
Part names and functions
63
En
Playing from the position touched on the waveform
Touch the waveform to easily play the audio starting from the position
touched. Keep touching the waveform and move your finger to move
to the desired position.
You can change the status of this function from the settings of the
[UTILITY] screen.
When [NEEDLE LOCK] in the [UTILITY] screen is set to [LOCK]
– Operation is possible during pause or while the jog wheel is being
pressed with the mode set to [VINYL].
When [NEEDLE LOCK] in the [UTILITY] screen is set to [UNLOCK]
– Operation is possible regardless of whether in the playback or
paused state.
The current playback position in playing address moves to the touched
point on the display.
• If you move your finger quickly, the playing address may not be
shown properly.