User Manual
Table Of Contents
- Before starting the procedure
- Speaker Layout
- Speaker Installation
- Speaker Connections
- Connections
- Playback
- Playing audio from an externally connected device
- BLUETOOTH® Playback
- Listening To the Radio
- Listening Mode
- AV Adjust
- Spotify
- AirPlay®
- DTS Play-Fi®
- Amazon Alexa
- Amazon Music
- TIDAL
- Connecting the Sonos System for Playback
- Internet Radio
- Multi-zone
- Using PERSONAL PRESET
- Playing music files saved on a USB storage device
- Music Server
- Play Queue
- Connecting a transmitter for playback
- Setup
- Troubleshooting
- Appendix
137
Setup
Manual MCACC
Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back
Right, Surr Back Left:
After selecting the speaker frequency from between "63 Hz" and "16 kHz" with
the cursors / , adjust the volume of that frequency between "-12.0 dB" and
"+12.0 dB" with / . To readjust the overall volume balance with "Trim", select
"Trim" in / , and use / to adjust the volume.
• If "OVER!" is displayed during adjustment, the volume of the frequency band
or another frequency band is too high, so reduce the volume of the frequency
bands until the display disappears.
• "63 Hz" can only be selected when this speaker is set to "Large" in "System
Setup" - "Speaker" - "Crossover".
• Depending on the use of the ZONE speakers, it may not be possible to select
this setting.
• If an item cannot be selected even though connection is correct, check
that the settings in "System Setup" - "Speaker" - "Conguration" - "Speaker
Channels" matches the number of connected channels.
Subwoofer:
After selecting the speaker frequency from between "31 Hz" and "250 Hz" with
the cursors
/ , adjust the volume of that frequency between "-12.0 dB" and
"+12.0 dB" with / . To readjust the overall volume balance with "Trim", select
"Trim" in / , and use / to adjust the volume.
• If "OVER!" is displayed during adjustment, the volume of the frequency band
or another frequency band is too high, so reduce the volume of the frequency
bands until the display disappears.
• This cannot be selected if "No" is set in "System Setup" - "Speaker" -
"Conguration" - "Subwoofer".