User Manual
Table Of Contents
- Before starting the procedure
- Speaker Layout
- Speaker Installation
- Speaker Connections
- Connections
- Playback
- Playing audio from an externally connected device
- BLUETOOTH® Playback
- Listening To the Radio
- Listening Mode
- AV Adjust
- Spotify
- AirPlay®
- DTS Play-Fi®
- Amazon Alexa
- Amazon Music
- TIDAL
- Connecting the Sonos System for Playback
- Internet Radio
- Multi-zone
- Using PERSONAL PRESET
- Playing music files saved on a USB storage device
- Music Server
- Play Queue
- Connecting a transmitter for playback
- Setup
- Troubleshooting
- Appendix
76
Playback
Room EQ
Dirac Live (*1): You can select the equalizers measured with Dirac Live
( →p150, p154) from "Slot1" to "Slot3". When disabling the equalizer, select
"Off".
• The Dirac Live measurement results are saved in "Slot1" to "Slot3", but
you are able to register your own original sound quality with Manual Adjust
( →p155).
• This cannot be selected when measurements are made using "Full Auto
MCACC".
MCACC EQ (*1)(*3): Enable or disable the equalizer function that corrects for
distortion caused by the acoustic environment of the room.
Phase Control (*1): Correct phase disturbance in the low range to enhance the
bass. This enables you to achieve powerful bass reproduction that is faithful to
the original sound.
Theater Filter (*2)(*3): Adjust the soundtrack that was processed to enhance its
high pitch range, in order to make it suitable for home theater.
Standing Wave (*1)(*3): Setting this "On" will control the effect of the standing
wave generated by the sound wave reected by wall or similar interfering with
the original sound wave.
(*1) It cannot be set if the listening mode is Pure Direct.
(*2) It cannot be set if the listening mode is Direct or Pure Direct.
(*3) This function cannot be used if Dirac Live ( →p76) is being used.
Furthermore, there is no effect even if it can be selected.
Level
Front: Adjust the speaker level of the front speakers while listening to the sound.
Center: Adjust the speaker level of the center speaker while listening to the
sound.
Subwoofer: Adjust the speaker level of the subwoofer while listening to the
sound.
• If you set the unit to the standby mode, the adjustments you made will be
restored to the previous statuses.