Installation Sheet

REV-11 10, 11

Main Supply Connection

4. Connectthefaucetshanktoinletsupplylines(F).

5.Connectthesupplystops(G)totheinletsupplylines(F)(leftishotwa-

tersupplyandrightiscoldwatersupply).Makesureinletsupplylines

(F)aresecurelytighten.Donotovertighten.Turnonwater.Checkfor

any leaks. Make sure all the connections are secure.

6. Remove aerator (H).Open the handles.Flush and allow water to

run at full ow for at least one minute. Close the handles.

7. Replace aerator (H).

For more care information or trouble shooting inquiries about your

Central Brass product, please see the contact information on the back page.