Installation Guide

REV-10 31, 12

Faucet Installation

8. Use main supply hoses (K) to connect to the main supply stops (L).

Tighten with adjustable wrench. Do not overtighten. Conventionally left is

hot and right is cold.

9. Turn on main supply stops. Check of any leaks. Make sure all the con-

nection are secure.

10. Remove the aerator (M) from the spout by turning counterclockwise. As

shown.Turn on the handle.

11. Flushandallowwatertorunatfullowforatleastoneminute.Turnoff

water. Replace aerator (M) by turning clockwise.