Installation Guide

REV-10 31, 12

Faucet Installation

Caution:Valveispresetatthefactorytestatmaximum.Adjustas

necessary. Please see the instructions below:

12. Turn off main supply stops and relieve the pressure.Remove handle

(N) by removing hole cover (O) and loosening set screw (Q) lift off

the handle.

13. Unscrew retainer sleeve (R) and retaining nut (S) counter clock-

wise.Usetwongersraisetheredadjustmentring(T).

14. Turn adjustment ring counter clockwise to decrease the tempera-

ture setting and clockwise to increase the temperature. Replace

the adjustment ring (T).Reassemble and test until desired safe

temperature is reached. (Note: Ensure proper alignment of cartridge

with notch in valve body.)

For more care information or trouble shooting inquiries about your

Pioneer Product, please see the contact information on the back page.