Installation Guide

REV-12 2, 13

Trim Installation (For 4MT100T)

Remove the protective cover if placed on the valve.1.

Threadthevalvesleeve(S)onthevalve.Installthehandleadapter2.

(T)onthedivertervalvestem.securethehandleadapter(T)withthe

screw.

Slidethefaceplate(T)onthevalvesleeve.Ensuretherubbergasket3.

isbehindthefaceplate(T).Ifnecessaryapplysilicontocaulkaround

thefaceplate(T)toformwatertightseal.

Installthehandle(V)onthehandleadapter(T).Tightentheallen4.

screw(W)with3/32”sizeallenwrench.

Check if water diverts to desired outlet.•

For more care information or trouble shooting inquiries about your

Pioneer Product, please see the contact information on the back page.