Engineering Excellence Engineering E xcellence Installation Guide Bathroom Accessories: • 7AM030 • 7AM031 • 7AM032 • 7AM033 • 7AM034 Pioneer Industries, Inc.
Thank you for purchasing this pioneer quality product. Tools Required Level Tape Measure Straight & Philips Screwdrivers Prior to Installation • • Do not use these products in any area where they are likely to be used inadvertently as a grab bar or support bar. These products are not designed or intended for use as a grab bar or support bar. Pioneer reserves the right to make changes in the design of faucets without notice as specified in the pricebook.
Bath Accessories Installation • • • • Determine the installation location for the bathroom hardware. Drill 1/4” diameter hole approximate 15/16” apart. Place plastic anchors screws (B) into the drilled holes using hammer to tap it in flush with the wall. Place the mounting plate (A) and secure them to the wall with the help of mounting screws. For 7AM030 & 7AM031 Install the mounting plate (A) 24-5/16” & 185/16” apart respectively. Secure the bathroom hardware with the screw at the bottom.
Engineering Excellence Engineering E xcellence 3325 S. Garfield Ave. | Commerce, CA 90040 Telephone: (800) 338-9468 | (323) 888-8873 | Fax: (323) 888-9515 Hours: M - F, 7:30am to 5:00pm PST www.pioneerind.
