Installation Guide

REV-11 19, 12

Bath Accessories Installation

Determine the installation location for the bathroom hardware.•

Drill 1/4” diameter hole approximate 1-1/8” apart. Place plastic anchors •

screws(B)intothedrilledholesusinghammertotapitinushwiththe

wall. Place the mounting plate (A) and secure them to the wall with the

help of mounting screws.

For 7MT030 & 7MT031 Install the mounting plate (A) 24-5/16” & 18-•

5/16” apart respectively.

Secure the bathroom hardware with the screw at the bottom. Do not •

overtighten.

For more care information or trouble shooting inquiries about your

Pioneer Product, please see the contact information on the back page.