User's Manual

DASH User Guide
32
1. Plug the AC adapter connector to the DC-Jack socket on the left side of
the system.
2. Plug the power cord to the AC adapter.
3. Plug the other end of the power cord to a live wall outlet, at the same
time, the Power LED at face panel lights up green.
-- For the power supply of this equipment, an approved power cord has
to be used.
-- Make sure the socket and any extension cord(s) you use can support
the total current load of all the connected devices.
-- Remove all power from the device prior to installing or removing any
accessories, hardware, or cables
-- Before cleaning the system, make sure it is disconnected from