English AVIC-F88DAB AVIC-F80DAB AVIC-F980DAB AVIC-F980BT AVIC-F9880DAB AVIC-F9880BT NAVIGATION AV SYSTEM Operation Manual Be sure to read Important Information for the User first! Important Information for the User includes the important information that you must understand before using this product.
Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. Important The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. Searching for a location by address................15 Searching for Points of Interest (POI)............
Contents Adjusting the volume.......................................52 ■ Bluetooth audio player.....53 Starting procedure..........................................53 Selecting files from the file name list...............53 ■ HDMI source.....................54 Starting procedure..........................................54 ■ AUX source.......................54 Starting procedure..........................................54 Setting the video signal...................................54 ■ AV input............
Precaution Notes on internal memory Basic operation Meanings of Symbols Used in This Manual Before removing the vehicle battery If the battery is disconnected or discharged, the memory will be erased and must be reprogrammed. Some of the settings and recorded contents will not be reset. X0000BT F88DAB F80DAB This indicates to touch an appropriate soft key on the touch screen.
Basic operation 3 4 MAP button button Press to display the map screen. Press and hold to switch to the camera view mode. p This function is available only when “ Back Camera Input” or “2nd Camera Input” is set to “On”. Press to display the top menu screen. Press and hold to activate the voice recognition function. Refer to Using the voice recognition function on page 33 5 MODE button Press to switch between the Application screen and the AV operation screen. Press to turn the display off.
Basic operation Inserting and ejecting a disc Inserting a disc F88DAB F80DAB 1 Press the 2 Touch button. to open the LCD panel. 3 Insert a disc into the disc-loading slot. F980DAB F980BT F9880DAB F9880BT Inserting and ejecting an SD memory card Plugging and unplugging a USB storage device F88DAB F80DAB p This system is not compatible with the Multi Media Card (MMC). p Compatibility with all SD memory cards is not guaranteed.
Basic operation On first-time startup 1 Start the engine to boot up the system. The “Select Program Language” screen appears. p From the second time on, the screen shown will differ depending on the previous conditions. p From the second time on, enter the password for the antitheft function if the password entry screen appears. 2 Touch the language. 3 Touch .
Basic operation How to use the screens Application menu screen Application operation screen Time and date setting screen Setting menu screen Top menu screen AV operation screen Map screen Phone menu screen Favorite source icons Navigation menu screen 8 AV source selection screen
Basic operation p By pressing the button on any screen you can display the top menu screen. p The character string “APPS” is replaced with “Apple CarPlay” when Apple CarPlay is running. p F88DAB/F80DAB The character string “APPS” is replaced with “Android Auto” when Android Auto is running. p If you select “Power OFF” on the AV source selection screen, you can turn off almost all functions. The “Power OFF” mode is released in the following cases: — An incoming call is received.
Basic operation Common touch panel keys How to use the Navigation menu screen Operating the on-screen keyboard : Returns to the previous screen. : Closes the screen. 1 2 Operating list screens 1 Searches for your destination by the address or coordinates, or searches for the selected place of interest, etc. 2 3 3 1 Touching an item on the list allows you to narrow down the options and proceed to the next operation. 2 Appears when all characters are not displayed on the display area.
How to use the Navigation menu screen 1 Configures the navigation-related settings. 2 You can also access the “SyncTool” screen from this menu. 2 Displays route alternatives, parts of the route to avoid, or specific roads in your planned route to avoid. 3 Suspends and resumes the route guidance. 4 Displays the route in its full length on the map, and displays route parameters and route alternatives. 5 Deletes your route or removes a waypoint.
How to use the map Most of the information provided by your navigation system can be seen on the map. You need to become familiar with how information appears on the map. AV information bar Smart Zoom AV information is displayed at the bottom of the map screen. Your navigation system features “Smart Zoom” that works in two ways: When the route is set: When approaching a turn, “Smart Zoom” will zoom in and raise the view angle to enable you to easily recognise your manoeuvre at the next junction.
How to use the map Scrolling the map to the position you want to see 1 Press the MAP button. 2 Touch anywhere on the map or touch and drag the map in the desired direction to scroll. If you place the cursor on the desired location, a brief overview about the location will appear at the top of the screen, showing the street name and other information for the location. 3 Touch . The map returns to the current position. p If you press the MAP button, the map returns to the current position.
How to use the map Signposts Signs are displayed at the top of the map. Browsing the data field The data fields are different when you are navigating a route and when you have no specified destination. For example, the data field provides the following information. When the route is set: Distance to final destination, time needed to reach the final destination and estimated arrival time are shown.
Searching for a destination Searching for a location by address The most frequently used function is the address search in which the address is specified and the location is searched. p Depending on the search results, some steps may be skipped. 1 Press the MAP button and touch . 2 Touch [New Route]. 3 Touch [Address]. 4 Touch the following text box and set the destination you are looking for. Country: By default, your navigation system proposes the country where you are.
Searching for a destination Searching for providers nearby that offer emergency or roadside assistance services Never use this product to route to hospitals, police stations or similar facilities in an emergency. Stop using any functions relating to the hands-free phoning and please call the appropriate emergency number. You can search for locations that provide emergency or roadside assistance in the surrounding areas. p This information does not necessarily correspond to actual information.
Searching for a destination 2 Touch [New Route]. Searching for a location using “Combined Search” 3 Touch The “Combined Search” feature lets you quickly find a place by its name and search area. p The “Combined Search” function also searches your stored data. 1 Press the MAP button and touch . 2 Touch [New Route]. 3 Touch [Combined Search]. 5 Enter the latitude value and touch [OK]. p When a value is already entered in the text field, delete the value first.
Checking and modifying the current route Modifying the route When navigation is already started, there are several ways to modify the current route. The following sections describe some of those options. Building a route using “Route Planner” The “Route Planner” (or “My Route”) feature lets you build your route using the list of destinations. Editing the list allows you to plan your route easily. p Once you set the route, you can edit your route using the menu displayed as “My Route”.
Checking and modifying the current route For information about route calculation conditions, refer to Route Planning Method on page 25 Cancelling the current route guidance 3 5 Touch [Select]. The selected route is applied as your current route. If you no longer need to travel to your destination, follow the steps below to cancel the route guidance.
Registering and editing locations and routes Storing a location in “Saved Location” Storing your favourite locations in “Saved Location” allows you to save the time and effort used on re-entering this information. “Saved Location” can include your home location, workplace, and places you have already registered. Storing your home and your workplace location You can store one home location and one workplace location. 1 Press the MAP button and touch . 2 Touch [New Route], and then [Saved Location].
Registering and editing locations and routes Saving a location as an alert point Important The warning for road safety cameras (like speed cameras) is disabled when you are in certain countries where warnings for road safety cameras are prohibited. However, you are fully responsible for ensuring that this feature is legal in the country where you intend to use it. You can save any map location (such as a school zone or railroad crossing) as an alert point.
Receiving real-time traffic information (TMC) p If a route is set, relevant events for your current route are shown in the upper section of the list. p Touching the desired item allows you to check its position on the map. Touch or to show the previous or next event. 1 Displaying the “Useful Information” menu Checking the traffic incidents on the map The “Useful Information” menu contains various information to support your driving.
Checking useful information about your trip — Police: — Petrol Station: Country Information: Checks for useful driving information about the selected country (for example, speed limits and maximum blood alcohol level). p This information may not necessarily correspond to the actual regulations, etc. Utilize the information for your reference. Trip Monitor: Checks the statistical data of your trips (for example, start time, end time, average speed, etc.).
Checking useful information about your trip Calculating the fuel consumption The fuel consumption monitor helps you keep track of the fuel consumption of your car even if you do not use the navigation system for all your journeys. Set the initial odometer value and then record the distance driven and the amount of fuel whenever you fill up your car. You can also set reminders for regular car maintenance.
Customising preferences of the navigation Trip Monitor: Turns automatic trip log saving on or off and checks the current size of the trip database. Refer to “Trip Monitor” settings on page 28 AVICSYNC Displays the connection method for AVICSYNC. p The setting value is fixed. Use this product as it is. Online Services: Enables or disables the connected services.
Customising preferences of the navigation Car Shuttle Trains When this function is turned off, the route is calculated prioritizing the avoidance of car shuttle trains. Car shuttle trains are used to transport vehicles for relatively short distances and they usually connect places that are not easily accessible by road. Carpool Lanes When this function is turned off, the route is calculated prioritizing the avoidance of carpool and HOV lanes.
Customising preferences of the navigation “Navigation Map” settings Map Display You can see the effect when you change a setting. Viewpoint You can adjust the basic zoom and tilt levels to your needs. Some preset levels are available. If you select “Manual”, you can store adjusted map scales and view angles. Colour Mode You can switch between daytime and nighttime colour modes or let the software switch between the two modes automatically a few minutes before sunrise and a few minutes after sunset.
Customising preferences of the navigation p This system may not support all the listed units in some voice guidance languages. Distance The unit of distance can be changed. Fuel Economy The unit of fuel mileage can be changed. Weight The unit of weight can be changed. Temperature The unit of temperature can be changed. Coordinate Display Format The format of the coordinates can be changed. Currency The currency unit can be set.
Customising preferences of the navigation 3 Touch [Warnings]. 4 Touch [Alert Points]. 5 Touch [Alert Point Warnings] to turn it on. 6 Touch the item you want to set. Alert Types Sets the type of alert point. Speed Camera Types Sets the type of speed camera. p When you are driving in France, [Speed Camera Types] is not available and [Dangerous Zone (HVA)] becomes available instead. If [Dangerous Zone (HVA)] is set to on, alert points that you set are also alerted as dangerous zones.
Customising preferences of the navigation AVICSYNC compatibility AVICSYNC is available for the following models. p Depending on the software version of the iPhone and Android, it may not be compatible with this product. For latest compatibility with this product and AVICSYNC App, refer to the information on our website. iPhone models iPhone 6 Plus: iOS 8.x iPhone 6: iOS 8.x iPhone 5s: iOS 7.x, 8.x iPhone 5c: iOS 7.x, 8.x iPhone 5: iOS 7.x, 8.x iPhone 4s: iOS 7.x, 8.x iPhone 4: iOS 6.
Bluetooth® connection Setting Bluetooth device auto connection This function connects the last connected Bluetooth device to this product with the Hands-Free Profile automatically as soon as the devices is less than a few metres apart. The default setting is “On”. Switching visibility Updating Bluetooth software This function sets whether or not to make this product visible to the other device. The default setting is “On”. This function is used to update this product with the latest Bluetooth software.
Hands-free phoning The dial screen appears and dialling starts. *2 1 Press the Using the preset dial lists *3 2 Touch *1 *4 button. . Making a phone call *5 *6 You can make a phone call in many different ways. . p To end the call, touch Direct dialling *1 Switches to the preset dial screen. Refer to Using the preset dial lists on page 32 *2 Switches to the phone book list. Refer to Calling a number in the phone book on page 32 *3 Switches to the missed, received and dialled call lists.
Hands-free phoning Minimising the dial confirmation screen p The dial confirmation screen cannot be minimised on the AV operation screen. p AV sources cannot be selected even if the dial confirmation screen is minimised while talking on the phone or receiving an incoming call. 1 Touch . Touch again. to display the dial confirmation screen Changing the phone settings Setting auto answering You can select whether or not to answer a call automatically. The default setting is “Off”.
Setup for iPod / iPhone or smartphone Depending on the mobile phone, phone book transfer may not be available. When using an iPod / iPhone or a smartphone with this product, configure the settings of this product according to the device to be connected. This section describes the settings required for each device. The basic flow of iPod / iPhone or smartphone setup 1 Select the method for connecting your device.
Setup for iPod / iPhone or smartphone Information on the connections and functions for each device The settings and cables required for connecting each device, and the available sources are as follows.
Setup for iPod / iPhone or smartphone Android device Device connection method When connecting via Bluetooth F88DAB/F80DAB When connecting via CD-MU200 (sold separately) F88DAB When connecting via CD-AH200 (sold separately) Device Others Others Others Connection Bluetooth / — (*5) USB2 HDMI Android Auto — On (*1)/Off — Bluetooth connection Bluetooth connection is required. Bluetooth connection is required for using Android Auto. Bluetooth connection is required.
Radio Displays the preset channel list. Select an item on the list ("1" to "6") to switch to the preset channel. Selects the FM1, FM2, FM3, MW or LW band. Stores song information to an iPod. Refer to Storing song information to an iPod (iTunes® Tagging) on page 70 p By pressing the or button, you can also switch the preset channels. or button and p By pressing and holding the release, you can also perform seek tuning. Starting procedure 1 Display the AV source selection screen.
Radio Switching the sound quality of the FM tuner Limiting stations to regional programing The default setting is “Standard”. p This function is available only when you receive the FM band. You can switch whether the area code is checked during the Auto PI search. The default setting is “On”. p This function is available only when you receive the FM band. 1 Display the “Radio Settings” screen. Refer to Displaying the “Radio settings” screen on page 37 2 Touch [Tuner Sound]. 3 Touch the item.
Digital Radio *1 Displays the service list screen. Refer to Selecting a service component on page 39 Listening to a recent broadcast (time shift mode) *2 Switches to time shift mode. Refer to Listening to a recent broadcast (time shift mode) on page 39 This product stores recent broadcasts to memory automatically. You can pause or listen to the stored broadcasts again by using this function (time shift mode). or button, you can also switch p By pressing the the preset service components.
Digital Radio Disc Setting the Soft link The default setting is “Off”. p This setting is available only when “Service Follow” is set to “On”. Refer to Setting the service follow on page 39 p Depending on the model used, this menu may not be displayed. Plays tracks in random order. Audio source screen 1 This function is available for music CD. : Does not play tracks in random order. : Plays all tracks in random order. *1 1 Display the “DAB Settings” screen.
Disc Hides the touch panel keys. Video source screen 2 Video source screen 2 To display again the keys, touch anywhere on the screen. Performs frame-by-frame playback. HOLD Performs slow-motion playback. Each time you touch it changes the speed in four steps in the following order: 1/16 →1/8 → 1/4 → 1/2 *6 Video source screen 1 Sets a repeat play range. : Repeats all files. *3 *4 *5 Performs fast reverse or fast forward. Touch again to change play back the speed. Stops playback.
Disc *5 *6 Switches the subtitle/audio language. Refer to Switching the subtitle/audio language on page 42 Displays the DVD menu keypad. Refer to Operating the DVD menu using touch panel keys on page 42 or button, you can also skip files/ p By pressing the chapters forwards or backwards. or button, you can p By pressing and holding the also perform fast reverse or fast forwards. appears. p If a Video-CD with PBC On is being played, p You can set the screen size for the video image.
Compressed files Audio source screen 1 (Example: USB) *1 *2 *3 Plays files in random order. Hides the touch panel keys. To display again the keys, touch anywhere on the screen. : Does not play files in random order. : Plays all files within the repeat range in random order. Audio source screen 2 (Example: USB) Video source screen (Example: Disc) *3 *4 Skips files forward or backward. *5 Switches between playback and pause. Switches the current music information display. Sets a repeat play range.
Compressed files Video source screen (Example: Disc) Hides the touch panel keys. Still image screen To display again the keys, touch anywhere on the screen. Rotates the displayed picture 90° clockwise. Selects the previous or next folder. Still image screen *4 *4 Performs fast reverse or fast forward. Touch again to change the playback speed. *3 Touch again to change the playback speed. Switches between playback and pause. Switches between playback and pause. Sets a repeat play range.
Compressed files *4 Switches the media file type. Refer to Switching the media file type on page 45 *5 Switches the subtitle/audio language. p This function is available only for compressed video files stored on a disc. Refer to Switching the subtitle/audio language on page 45 You can play compressed audio, compressed video or still image files stored in a disc or an external storage device (USB, SD) using the built-in drive of this product.
Compressed files Still image file operations iPod Audio source screen 1 Changes the audiobook speed. Setting the slideshow interval *1 1 : Normal playback JPEG files can be viewed as a slideshow on this product. In this setting, the interval between each image can be set. The default setting is “10sec”. p This setting is available during playback of the JPEG files. *2 2 : Fast playback *3 1 Display the “Video Setup” screen. Sets the shuffle play. Skips files forward or backward.
iPod Hides the touch panel keys. Displays the link search screen. Refer to Selecting a song from the list related to the song currently playing (link search) on page 45 *2 Selects a song or video from the list. Refer to Selecting song or video sources from the playlist screen on page 47 p When connecting an iPhone or iPod touch, quit all applications before connecting the device. *3 Switches the control mode to “App Mode”.
iPod p This function is not available when using iPod function with an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, or iPod touch (5th generation). p While this function is in use, the iPod will not turn off even if the ignition key is turned off. Operate the iPod to turn off the power. 1 Touch . 2 Operate the connected iPod to select a video or song and play. p Some functions are still accessible from this product even if the control mode is set to “App Mode”.
AppRadio Mode Smartphone (Android) models For details about Android device compatibility with this product, refer to the information on our website. Using AppRadio Mode You can control applications for an iPhone or a smartphone directly from the screen (AppRadio Mode). In AppRadio Mode, you can operate applications with finger gestures such as tapping, dragging, scrolling or flicking on the screen of this product.
AppRadio Mode Adjusting the image size (for smartphone (Android) users) F88DAB Black dots may appear on the screen when using AppRadio Mode with an Android device connected to this product. p This setting is available only when you stop your vehicle in a safe place and apply the handbrake. p This function can be set when your Android device is able to enter AppRadio Mode.
Apple CarPlay p You can adjust the guidance volume and alert sound volume separately from the main sound volume when Apple CarPlay is used. Refer to Adjusting the volume on page 51 1 Connect an Apple CarPlay-compatible device to this product via USB. Refer to the Installation Manual. The Application menu screen appears. p If an Apple CarPlay-compatible device has been connected and another screen is displayed, touch [Apple CarPlay] on the top menu screen to display the Application menu screen.
Android Auto™ p To achieve optimum usability of Android Auto, set the driving position setting correctly according to the vehicle. Refer to Setting the driving position on page 52 p You can adjust the guidance volume and alert sound volume separately from the main sound volume when Android Auto is used. Refer to Adjusting the volume on page 52 p If the auto-launch function is set, Android Auto will launch automatically as soon as a connection to an Android Autocompatible device is established.
Bluetooth audio player Playback screen 1 p p p p p Skips files forward or backward. Plays files in random order. Playback screen 2 — A2DP and AVRCP (Audio/Video Remote Control Profile): Playing back, pausing, selecting songs, etc., are possible. Depending on the Bluetooth audio player connected to this product, some functions may not be available. While you are listening to songs on your Bluetooth device, please refrain from operating the phone function as much as possible.
HDMI source AUX source F88DAB Hides the touch panel keys. To display again the keys, touch anywhere on the screen. Hides the touch panel keys. Starting procedure You can display the video image output by the device connected to video input. 1 Display the “System” setting screen. To display again the keys, touch anywhere on the screen. 2 Touch [Input/Output Settings]. 3 Confirm that “AUX Input” is turned on. 4 Display the AV source selection screen.
AV input Setting the video signal Hides the touch panel keys. To display again the keys, touch anywhere on the screen. 6 Touch [AV]. Starting procedure (for camera) When you connect this product to an AV equipment, select the suitable video signal setting. The default setting is “Auto”. p You can operate this function only for the video signal input into the AV input. 1 Display the “Video Setup” screen. You can display the image output by the camera connected to video input.
MIXTRAX Exits the MIXTRAX screen. Starting procedure Specifies the BPM. 1 Insert the SD memory card into the SD card slot or plug the USB storage device into the USB connector. Displays the LinkGate screen. Touch the desired item. Songs related to the selected item are played. *1 *2 Refer to Inserting and ejecting an SD memory card on page 6 Refer to Plugging and unplugging a USB storage device on page 6 2 Display the AV source selection screen. 3 Touch [USB] or [SD].
MIXTRAX Displaying the “MIXTRAX Settings” screen 1 Display the “System” setting screen. Vehicle equipment information F88DAB F80DAB F980DAB F9880DAB Switches the display to the rear view camera image. The display switches only when the rear view camera setting is set to “On” and the gearstick is in the REVERSE (R) position. The heating setting for the seat The fan direction A/C Control screen 2 Touch [AV Source Settings]. 3 Touch [MIXTRAX Settings].
Vehicle equipment information Displaying obstacle detection information CAUTION This function is intended solely to assist the driver’s vision. It does not detect all dangers and obstacles and is not a substitute for your attentiveness, judgement, and care while parking your vehicle. p This function is only available for vehicles equipped with a parking sensor system. p The “Parking Assist” screen is not displayed until this product boots up completely. 1 Turn on the parking assist sensor on your vehicle.
System settings p When the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in “Reverse Gear Setting.”. while the camera image is displayed, the p If you touch displayed image will turn off temporarily. p When the camera view of both the rear view camera and 2nd camera are available, the key to switch the display appears. Touch this key to switch the display between the rear view image and 2nd camera image.
System settings Setting the reversed image 2 Touch [Safe Mode] to switch “On” or “Off”. The default setting is “Off”. p This setting is available only when you stop your vehicle in a safe place and apply the handbrake. p This function is available when “AV Input” is set to “Camera” or “2nd Camera Input” is set to “On”. Setting the demo mode 1 Display the “System” setting screen. Refer to Displaying the “System” setting screen on page 58 2 Touch [Camera settings].
System settings Setting the dimmer Setting the dimmer trigger The default setting is “Auto”. p This setting is available only when you stop your vehicle in a safe place and apply the handbrake. 1 Display the “System” setting screen. Refer to Displaying the “System” setting screen on page 58 2 Touch [Dimmer Settings]. 3 Touch [Dimmer Trigger]. 4 Touch the item. Auto: Switches the dimmer to on or off automatically according to your vehicle’s headlight turning on or off.
System settings You can only update the firmware when the vehicle is stopped and the handbrake is engaged. 1 Download the firmware update files into your computer. 2 Connect a blank (formatted) storage device to your computer, and then locate the correct update file and copy it onto the storage device. 3 Set the external storage device to this product.
Audio adjustments Displaying the “Audio” setting screen 1 Press the 2 Touch button. , and then . Using fader/balance adjustment Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. p Settings are based on the FM tuner volume level, which remains unchanged. p This function is not available when the FM tuner is selected as the AV source.
Audio adjustments Adjusting the speaker output levels finely Fine adjustments of the speaker output level can be made by listening to audio output. 1 Display the “Audio” setting screen. Refer to Displaying the “Audio” setting screen on page 63 2 Touch [Speaker Level]. 3 Touch [<] or [>] to select the listening position if necessary. The following items are available: Off, Front-L, Front-R, Front, All. p The default setting is “Off”.
Audio adjustments power to car phones or mobile phones in the vehicle, or remove them in advance. Surrounding sounds may prevent correct measurement of the vehicle’s acoustics. Be sure to use the microphone for acoustical measurement (sold separately). Using another microphone may prevent measurement, or result in incorrect measurement of the vehicle’s acoustics. To perform Auto EQ, the front speakers must be connected.
Theme menu Displaying the “Theme” setting screen Refer to Displaying the “Theme” setting screen on page 66 1 Press the 5 Touch the desired external storage device. 2 Touch button. , and then . 4 Touch . 6 Touch the image. Selecting the wallpaper Setting the illumination colour The wallpaper can be selected from some preset items. Furthermore, you can set your original pictures. The illumination colour can be selected from some preset colors.
Theme menu Changing to the splash screen stored on the external storage device CAUTION Do not turn off the engine while importing an image from the external storage device. 1 Set the external storage device. Refer to Inserting and ejecting an SD memory card on page 6 Refer to Plugging and unplugging a USB storage device on page 6 2 Display the “Theme” screen. Refer to Displaying the “Theme” setting screen on page 66 3 Touch [Splash Screen]. 4 Touch . 5 Touch the desired external storage device.
Video settings Setting the aspect ratio There are two kinds of displays. A wide screen display has a width-to-height ratio (TV aspect) of 16:9, while a regular display has a TV aspect of 4:3. If you use a regular rear display with a TV aspect of 4:3, you can set the aspect ratio suitable for your rear display. (We recommend use of this function only when you want to fit the aspect ratio to the rear display.) The default setting is “16:9”.
Video settings Setting the video output format You can switch the video output format of the rear display between PAL and NTSC. The default setting is “PAL”. p The video output format setting has no effect on “AUX”, “AV”, and “iPod” sources (when the control mode is set to iPod). p This function is available when “Source OFF” is selected on the AV source, and a source for the rear display other than “Disc”, “USB1”, “USB2”, and “SD” is selected.
Other functions 1 Display the “System” setting screen. Refer to Displaying the “System” setting screen on page 58 2 Touch [AV Source Settings]. 3 Touch [Tag Forwarding] to select the USB port you use. 4 Tune into the broadcast station. Refer to Radio on page 37 5 Touch the song information. 2 Touch the desired mode. Full: A 4:3 picture is enlarged in the horizontal direction only, enabling you to enjoy an image without any omissions.
Other functions 1 2 Appendix 3 Restoring this product to the default settings You can restore settings or recorded content to the default settings. Various methods are used to clear user data. Method 1: Remove the vehicle battery p Some of the settings and recorded contents will not be reset. Method 2: Restore the default settings from the “System” menu Refer to Restoring the default settings on page 71.
Appendix No sounds are produced. The volume level will not rise. Cables are not connected correctly. — Connect the cables correctly. The system is performing still, slow motion, or frame-byframe playback with DVD-Video. — There is no sound during still, slow motion, or frame-byframe playback with DVD-Video. The system is paused or performing fast reverse or forwards during the disc playback. — For the media other than music CD (CD-DA), there is no sound on fast reverse or forwards.
Appendix Positioning is not possible due to hardware error. Please consult your dealer or local authorised service centre. The location display is not possible due to hardware failure. — Contact your dealer or an authorised Pioneer Station for assistance. No GPS antenna. Check connection. GPS reception is lost. — Check the aerial connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or an authorised Pioneer Station for assistance.
Appendix Check USB The USB connector or USB cable has short-circuited. — Check that the USB connector or USB cable is not caught in something or damaged. The connected USB storage device consumes more than maximum allowable current. — Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect a compliant USB storage device. HUB Error The connected USB hub is not supported by this product.
Appendix Android Auto Android Auto has stopped. The connected device is not compatible with Android Auto. — Check if the device is compatible with Android Auto. The startup of Android Auto failed for some reasons. — Disconnect the cable from the smartphone, and then connect the smartphone again after a few seconds. — Restart the smartphone. — Turn the ignition switch to OFF and then to ON.
Appendix When driving among high buildings When driving through a dense forest or tall trees If there is a parallel road. Handling large errors Positioning errors are kept to a minimum by combining GPS, dead reckoning and map matching. However, in some situations, these functions may not work properly, and the error may become bigger. When positioning by GPS is impossible GPS positioning is disabled if signals cannot be received from more than two GPS satellites.
Appendix If you take a ferry. If you enter or exit a multi-storey car park or similar structure using a spiral ramp. If you are driving on a long, straight road or a gently curving road. If your vehicle is turned on a turntable or similar structure. If you are on a steep mountain road with many height changes. If your vehicle’s wheels spin, such as on a rough track or in snow. If you drive in zigzags. If the road has a series of hairpin bends.
Appendix Route setting information Route search specifications Your navigation system sets a route to your destination by applying certain built-in rules to the map data. This section provides some useful information about how a route is set. CAUTION If you join the road after driving around a large car park. If you put on chains, or change your tyres for ones with a different size. If trees or other obstacles block the GPS signals for a considerable period. When you drive around a roundabout.
Appendix The number of roundabout exits displayed on the screen may differ from the actual number of roads. Route highlighting Once set, the route is highlighted in bright colour on the map. The immediate vicinity of your starting point and destination may not be highlighted, and neither will areas with particularly complex road layouts. Consequently, the route may appear to be cut off on the display, but voice guidance will continue.
Appendix Playback of discs may become impossible with direct exposure to sunlight, high temperatures, or depending on the storage conditions in the vehicle. DVD-Video discs DVD-Video discs that have incompatible region numbers cannot be played on this DVD drive. The region number of the player can be found on this product’s chassis. DVD-R/DVD-RW/DVD-R SL (Single Layer)/DVD-R DL (Dual Layer) discs Unfinalised discs which have been recorded with the Video format (video mode) cannot be played back.
Appendix This product may not play back files, depending on the application used to encode the files. This product may not operate correctly, depending on the application used to encode WMA files. Depending on the version of Windows Media™ Player used to encode WMA files, album names and other text information may not be correctly displayed. There may be a slight delay when starting playback of audio files encoded with image data. This product is not compatible with packet write data transfer.
Appendix Maximum resolution: 720 pixels × 480 pixels Maximum Frame rate: 30 fps Maximum file size: 4 GB Maximum playback time: 150 minutes .mp4 Compatible video codec: MPEG-4/H.264/H.263 Compatible audio codec: MP3/AAC Maximum resolution: 720 pixels × 480 pixels Maximum Frame rate: 30 fps Maximum file size: 4 GB Maximum playback time: 150 minutes .3gp Compatible video codec: MPEG-4/H.264/H.
Appendix DivX Certified® devices have been tested for high-quality DivX® (.divx, .avi) video playback. When you see the DivX logo, you know you have the freedom to play your favourite DivX movies. DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license. This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod. divx.com.
Appendix Service availability may be geographically limited to the region. Consult the connected content service provider for additional information.
Appendix video in the form of disturbances such as spots or coloured stripes. Maintaining the LCD screen When removing dust from or cleaning the LCD screen, first turn this product off and then wipe the screen with a soft dry cloth. When wiping the LCD screen, take care not to scratch the surface. Do not use harsh or abrasive chemical cleaners. DIN Chassis ............................................178 mm × 100 mm × 157 mm Nose ...................................................
Appendix JPEG decoding format ..............................................................JPEG SD F88DAB/F80DAB Compatible physical format............................................ Version 2.0 File system .........................................................FAT16, FAT32, NTFS MP3 decoding format ............... MPEG-1/Layer 1, MPEG-1/Layer 2, MPEG-1/Layer 3, MPEG-2/Layer 1, MPEG-2/Layer 2, MPEG-2/ Layer 3, MPEG-2.5/Layer 3 WMA decoding format ...........................
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/ Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 To keep up to date with the latest navigational data, you can periodically update your navigation system. For further details, please visit: http://pioneer.naviextras.com © 2016 PIONEER CORPORATION.
