Instructions

you are sure that the glass lets the signal through, and where
you stick it, make sure the antenna film does not overlap
with the heating wires, which will affect the reception
performance.
4. Now remove the adhesive backing from the antenna
amplifier box and stick to the dry windshield glass, gently
applying pressure to remove any air bubbles.
5. Install the antenna cable behind the A-Pillar with the help of
installation tool and connect it to Pioneer SDA-11DAB
6. Do not attach the DAB+ antenna over heating wires, in a
place that obstructs the driver's view, or in a place that can
experience interference from metal.
Note: Ensure that the signal gets through the window. Heat wires
and certain forms of shading or sun filter, may cause the signal to
not pass through.
Antenna cable installed
inside
A-Pillar
Antenna film
Antenna Amplifier Box
Magnetic grounding tap
Antenna cable
Antenna amplifier box
Antenna film