Installation & Assembly
3
REV-11 19, 12
Faucet Installation
Place the spout escutcheon (B) underneath of the spout (A). Ensure the 1.
gasket (C) is placed underside of the escutcheon (B). Slide the spout
(A) through center mounting hole. Slide the spout mounting bracket (D)
through spout shank from underside of center mounting hole.
Thread and tighten the spout mounting nut (E). Do not overtighten.2.
Ensure the washer (F) inside the ‘Y’ connector (G). Connect the ‘Y’ con-3.
nector (G) to the spout shank. Place teon tape at the end of the spout
shank if necessary. Do not overtighten.